The Rx4 PIR motion sensor is your prescription for installations that demand uncompromised performance. Only Ademco can combine innovative Rx processing technology with its patented AP Quad detection. The result? A remedy that gives reliable protection without irritation due to false alarms, including small pets and animals!

  • Rx signal processing
  • Advanced micro-controlled signal analysis
  • Automatic adaptation to environmental disturbances
  • Advanced dual-slope temperature compensation
  • Dual channel supervision
  • Zone-locating walk-test mode
  • Patented Alternate Polarity (AP) Quad detection
  • Immune to small pets and animals up to 20 lbs. Interchangeable long range/curtain mirror included. Optional pet alley mirror (1875PA) and swivel mount bracket (998SB) available.

Specifications:

Detection Method:

Coverage:

 

 

Detection Pattern:

Pulse Processing:

Detectable Walk Rate:

Mounting Height:

Indicators:

Alarm Relay

Input Voltage:

Current:

Operating Temp:

Operating Humidity:

Dimensions:

AP Quad Passive Infrared

Standard Wide Angle Mirror

35’x45’ (10.6m x 13.7m)

Long Range/Curtain Mirror

70’xl 0’ (21.3m x 3rn)

Standard Mirror: 9 zones (6 long, 3 short)

Long Range/Curtain. 1 zone, 7 tiers Installer selectable, 1-or 2-event

Standard or Intermediate, selectable via DIP switch 2,5m nominal

0.5-5’/sec (0.15-1.5m/sec)

7’ (2,1m) nominal

Red LED; enabled/disabled via DIP switch

Form A, N,C., 28VDC, 0.13A max, with 15 ohm protection resistor

9-16VDC with reverse polarity protection

12ma nominal (non-alarm)

16ma nominal (alarm, LED enabled)

-20ºF to 122ºF (-29ºC to 50ºC)

Up to 95%RH (max,), non-condensing

67mm x 111mm x 48mrn