• Six on-board hardwired zones
  - Hardwire expansion up to 22 zones
  - Wireless expansion up to 26 zones

• Eight independent keyfob zones allow wireless keys to be programmed without using any of the 22 zones

• Six on-board hardwired zones standard

• Expandable to 32 total zones when used with hardwired and/or wireless expansion modules

• Hardwire expansion up to 16 zones Wireless expansion up to 26 zones

• Wireless Keys can be programmed without using zones

• Eight output devices
  - Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or
  - X-10 ® devices (when used with a 4300 Transformer)

• Two low current on-board trigger outputs

• 50 Event Log viewable at system keypads with time/date stamp

• 32 system user codes

• Two installer configurable zone types allows the installer to "create custom zone types" by assigning all zone attributes

• Multiple actions on output devices depending on system "state"
  - Turns light off when system arms
  - Turns same lights on when system disarms
  - Flashes same lights when system is in alarm

• Built-in phone line cut monitor with programmable delay and annunciation options
  - Display on system keypads
  - Trigger local sounders
  - Trigger system bell

• Supports four-wire, and up to 16 two-wire smokes
  - Works with Sentrol CleanMeT maintenance signal

Valuable End-User Features

• Now viewable on system keypads:
  - Exit countdown
  - Time and date display*
  - Event log*

• Auto keypad backlighting on entry

• Keyswitch arming

• Programmable macro buttons and single-button arming

• A variety of wireless remote controls for single-button operation

• User Scheduling
  - Automatically activates X-10 and relays at programmed times
  - Latchkey reports to pagers
  - Auto arm/disarm
  - "User access" time windows

• Supports up to two numeric pagers

• VIP Module allows system control from any touchtone phone

• Chime by zone

*Requires custom alpha keypad

UL approved for ANSI/SIA CP-01-2000

Security Dealer Features

• False alarm prevention features help reduce false alarms

• Automatic System Load Shed
  - During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries

• Dynamic Signaling
  - Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet Radio

Specifications

Electrical

• Aux. power 12VDC, 600mA maximum

• Seven hour standby at 400mA aux. load with four amp hour battery

• 16.5VAC/25VA transformer

• Alarm output 12VDC, 2.0 amps maximum

• For UL installations, combined aux. and alarm output cannot exceed 700mA

Output Control

• Supports a maximum of eight output devices (combination of relays and/or X-10) plus two onboard triggers

Zones

• Six hardwired zones

• Selectable response: 10msec, 350msec, 750msec

• 16 selectable zone types plus two configurable zone types

• Programmable swinger suppression

Expansion Devices

• 4219 - Eight hardwired zones - 16mA

• 4204 - Up to four relays - 15mA standby (each active relay draws an additional 40mA)

• 4229 - Eight hardwired zones and two relays - 36mA (each active relay draws an additional 40mA)

Accessories

• 4286 VIP Voice Module - 220mA

• 5881ENL supports up to eight zones - 60mA, 5881ENM supports up to 16 zones - 50mA, 5881ENH supports up to 26 zones - 50mA

• 5883 Transceiver supports up to 26 zones - 80mA

• Supports Eagle 1225 and 1221 boards

Keypads

• 6160 Custom English (required for programming) - 100mA

• 6150 Fixed English LCD - 85mA/40mA

Agency Listings

• UL Residential Fire, Burglary and CSFM

Smoke Detectors

• Supports up to 16 two-wire smoke detectors

• Supports four-wire smoke detectors

Communications

• Touchtone or pulse

• Formats supported
  - ADEMCO Contact ID
  - ADEMCO 4 + 2 Express
  - ADEMCO low speed
  - Sescoa/Radionics

• 3 + 1, 4 + 1 and 4 + 2 reporting

• Reporting capabilities
  - Split
  - Dual
  - Split/Dual - True dial tone detection

• Low battery reports 11.2 - 11.6VDC

• AC loss and restoral reporting supported