Features | Zones | Wireless Operation | Partitions | Outputs | User Codes | Additional Features | SmartLogT | 
 Keypads | Programming/Remote Operations | Central Station Communications | Power Specifications | Listings

Users Manual PDF >>>
Installation Manual PDF >>>

• 8 zones expandable to 48 zones
• Eight Fully programmable wired zones (16 zones with our unique zone doubling option)
• 16 fully programmable wired zones with our OMNI-EXP8 - 8 hardwired zone expander (32 zones with our unique zone doubling option)
• 48 total zones with wireless
• Operates with FBII International wireless devices
• Supports eight 4-button wireless keys without taking up any zones
• Four totally programmable trigger outputs on board
• Up to 20 fully programmable relay outputs
• Built-in multilingual support for: English, Italian, Spanish, French, Dutch and Portuguese
• System Log retains the past 128 
  Events - New selectable SmartLog
• 64 User Codes with four authorization levels
• Up to 4 partitions (3 partitions plus a common area)
• Auto-Arming by partition
• Tamper option by zone
• Built-in Telephone Line Monitor
• Zones may be configured as wired, wireless, E.O.L., D.E.O.L., N.O., N.C. or Zone Doubling
• Follow Me (Beeps audio format), domestic dialing
• Paging
• Inactivity zones programmable by partition

• Eight fully programmable EOL or DEOL supervised wired zones on main board (up to 16 N.C. wired zones with our unique zone doubling option)
• Expansion through plug in modules OPTIONS: model OMNI-EXP8 (eight zone wired expander), OMNI-RF (48 zone wireless receiver)
• 16 traditional EOL or DEOL supervised wired zones with OMNI-EXP8 zone expander module (up to 32 N.C. wired zones with our unique zone doubling option)
• Zones seven and eight may be programmed as fast zones (10 msec)
• Zone programming selectable as EOL, DEOL, Zone Doubling, NO, NC
• Four Emergency keypad conditions (Fire, Panic, Personal Emergency, Duress)
• Versatile Zone Types:
  - Controlled Zone types include: Instant, Exit/Entry, Interior, Day, and keyswitch, with options for Fast Loop Response (zones 7 and 8), Restore, Chime, Bypass and Dialer delay by zone         
  - 24 Hour Zone Types include: Fire, Burglary, Silent, Trouble, and Medical
• Programmable central station reporting codes per zone
• Individual reporting codes for Ambush, Panic, AC Loss, 24 Hour Test, Low Battery, Open/Close, Trouble, Restore
• Cross zoning
• Stay Delay Mode provides an additional 40 seconds of dialer and/or siren delay for special interior zones when armed in the stay mode
• Arm while a zone is faulted option
• Restore options: after siren time-out or follows loop
• Keyswitch option per zone
• Chime option by zone
• Inactivity option by zone transmits signal to C.S. if zone has not been activated in a preset time
• Multilingual support selectable in several languages: English, Italian, Spanish, French, Dutch, Portuguese, Chinese and Hebrew

• 48 zone wireless receiver (OMNI-RF) attaches directly to PCB
• Compatible with FBII International wireless peripherals
• Dual diversity antenna
• RF Jamming Option
• Fully supervised wireless displays complete zone status, low battery and RF trouble by zone on all keypads
• System supports eight wireless keys with each button individually programmable.
• Additionally, each button can activate triggers/relays
• Wireless remote keyfob transmits
• Open/Close ID's for each remote
• Separate RF Dings for arming and disarming with remote keys

• Three partitions plus a common partition
• Zones, User Codes, Keypads, and Remote Keyfobs may be assigned to each partition
• Extensive cross partition support
• Separate account and pager numbers for each partition
• Auto arming by partition
• Inactivity zones programmable by partition
• View all partitions from a single keypad
• Partition descriptor uniquely identifies each partition
• Multi Partition mode allows secure operation of the system through any keypad by authorized users
• Arm/Disarm all partitions through a single keypad by authorized user
• Partition Status keypad mode

• Four (inverted) voltage level output triggers on board and up to 20 Relays programmable as follows: Burg Siren, Fire Siren, Partition Armed, Partition Ready, Entry Delay, Exit Delay, Armed Instant, Armed Stay, Sounder On, Chime, Line Seize, Phone Fail, AC Loss, Low Battery, 24hr. Zone Trouble, 24hr. Zone Alarm, Instant Zone Fault, Delay Zone Fault, Interior Zone Fault, Zone Tamper, RF Low Battery, RF Supervision, Communication Failure, Keypad Tamper*, Duress Code*, Panic Key*, Memory of Alarm Strobe, Trigger Zone*, Shock Sensor reset*, CS Test*, Alarm/Restore, 2 way voice, Momentary (seconds), Momentary (minutes), Toggle (on/off)
  *Outputs/relays programmable duration in seconds and minutes for each partition
• Supports up to 20 relays per system (5 per XL4705 external relay module)
• Relays and triggers can be linked to zones, wireless remote keyfobs, keypad emergency and system conditions
• Select time duration for momentary conditions

• 64 User Codes, with four authorization levels
• 4 or 6 digit user codes
• Programmable Open/Close ID's for each user
• Programmable access to partitions for each user
• Option to transmit O/C signals by user
• Ambush/Duress and Door Strike codes
• Arm/Disarm all partitions through any keypad by authorized users
• Quick arming, Quick forced arming, Quick bypass options
• Arm only code
• Paging option by user

• Cancel Code feature, with siren verify option
• Dual entry delay timers
• Installer Walk Test feature
• Telephone Line Monitor
• Real time clock with reminder when time needs to be reset
• Siren Test option, Smoke Detector reset and verification options
• Separate alarm cutoff times for BURG and FIRE siren
• Programmable entry/delay times, and siren lockout feature
• Intermittent sensor shutdown option
• AC Based Real Time Clock (50/60hz selectable)
• Siren Supervision
• Busy Tone Detection
• End User Chime selection
• System stabilization mode prevents false alarms during power-up
• Recent Close and Exit Error options
• Keypad Tamper function with optional C.S. transmission
• Keypad Lockout Option
• Quick Exit
• Arm while a zone is faulted
• Option to display zone status upon entry delay
• Programmable Dialer Attempts programmable between 1-16
• LED Extinguish option
• AC/LB sounder disable option
• Display bypassed zones during armed state
• Chime on/off option through keypad
• Single Key Arming Options by pressing either the "Stay" or "Instant" key on all FBII keypads, or by using the Chatbak-V or wireless remotes
• Auto stay option
• Auto-unbypass option
• Flexible system test timers (1, 7, 27, 60, 90 days) with options for test by time, event or both. Additional one hour test time option for high security applications

• FBII's unique SmartLog option allows you to choose the events to be stored in memory
• Panel retains past 128 events
• 90% or 100% full indication of system log transmitted to C.S.
• System log viewable locally at LCD keypad or uploaded to Alarm Company
• Date (DD/MM or MM/DD) and time (24hr. or AM/PM) option
• End User view option

• Supports up to 12 keypads per system (LED,
• Fixed word LCD, and custom language programmable LCD)
• LED keypad displays status of each individual zone, with indications of Alarm, Trouble, Tamper, Stay, Bypass, Instant, Power and Not Ready conditions
• Fixed word LCD keypad displays status of each zone, with indications of Alarm, Fire, Trouble, Tamper, Bypass, Page, RF Supervision, Canceled, Chime, Phone, Test, AC, Battery, and Not Ready conditions
• Custom language LCD keypads display complete system status, in 2 line by 16 character SupertwistT display for easy viewing
• All keypads available in many languages. Please contact your nearest distributor for details

• On-site programming directly through keypads
• Remote programming through WindowsT Downloader
• Security features include special CSID and Installer codes, callback number, default lockout feature and option to inhibit keypad programming
• On-line and unattended downloading
• Up/Download remotely even in the presence of fax/answering machines
• Remote operations can be performed through single or a two call method
• Remote operations include: arm, disarm, bypass zones, change user codes, read system status, view event log and more

• Dual central station telephone numbers for each partition
• Two CS account numbers (3 or 4 digits) for each partition
• Pulse or DTMF dialing options
• Pulse formats include 3x1, 4x1, 4x2, 
  Expanded: Speeds 10, 20, 40PPS with or without parity
• FBII Superfast, Ademco Express 4x1, and 4x2 formats, Ademco CID format
• Split and Dual reporting option for each partition
• Sonalert ringback feature
• Follow me (domestic dialing), paging, beeps audio formats

• Watchdog circuitry insures integrity of microprocessor
• Total Aux. power: 500mA. regulated
• Transformer: 16.5V 40VA
• Alarm Power: 1 Amp

• CE, TBR21 and Austel
• Pending ANPI and UL