HAI Part Number: 37A00-1
Case of 12: 37A00-1CS
Requirements:
- Requires a neutral (white) connection wire.
- If you are using an HAI home control system with your switch you must install a UPB™ PIM & cable (HAI Part Number
36A00-1). \
- If you are using the HAI Upstart Configuration software you must install an UPB™ PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2).
Recommendation:
HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler (HAI Part Number 39A00-1).
Usage
The Auxiliary Switch can be used with any HLC Switch to make "three-way" (two switches control one light) and multi-way (more than two switches control one light) using conventional "three-way" wiring techniques.
HLC Products work as stand-alone or with a Home Control System.
An HAI home control system has the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, Touchscreen, Smartphone, or by a computer connected to the Internet.
 About HLC
All HLC products, including this Auxiliary Switch, are UL Listed.
Switch Diagram
 |
Switch Operation
The Auxiliary switch has a Decora-style rocker switch that may be used to control the lighting load as follows:
Rocker Event |
Top Rocker |
Bottom Rocker |
| Single-Tap |
Brightens the light towards fully on |
Fades the light to fully off |
| Double-Tap |
Snaps the light to fully on |
Snaps the light to fully off |
| Hold |
Starts brightening the light towards fully on |
Starts dimming the light towards fully off |
| Release |
Stops brightening the light |
Stops dimming the light |
Switch LED
The Auxiliary switch comes with equipped with a multi-color LED indicator that may be set to off, blue, red, or magenta, depending on how the switch is wired.
If the switch is wired to use the LED, it will always remain on with the hard-wired color, regardless if switch is on or off.
Colors
This switch comes with a default white paddle, connectors, and instructions.
Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only. |
