HAI Part Number: 55A00-3WH (White)
55A00-3IV (Ivory)

Requirements:

• Requires a neutral (white) connection wire.
  
  
• If you are using an HAI home control system with your switch you must install a UPB™ PIM & cable (HAI Part Number 36A00-1).
  
  
• If you are using the HAI Upstart Configuration software you must install an UPB™ PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2).
  
  

Recommendation:

HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler (HAI Part Number 39A00-1).

Usage

The HAI UPB™ 2400W Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch.

HLC Products work as stand-alone or with a Home Control System.

An HAI home control system has the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, Touchscreen, Smartphone, or by a computer connected to the Internet.

About HLC

All HLC products are UL Listed and use Generation II Universal Powerline Bus (UPB™) – a digital communications standard for lighting and home control that ensures superior reliability. UPB™ has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB™ works over existing wires in a home and does not require new wiring.

Switch Diagram

Switch Operation

The 2400W switch has a Decora-style rocker switch that may be used to control the lighting load as follows:

Switch LED

The 2400W switch comes with equipped with a multi-color LED indicator, which may be set to off, blue, red, or magenta. The default settings are as follows:

Switch is off - LED is blue
Switch is on - LED is off

You may change these default colors by using the HAI UPB™ UPStart configuration software (see below).

De-rating

For a proper fit in a multiple gang installation, it may be necessary to remove one or both of the break-off tabs on the sides of the 2400W switch. When tabs are removed, the overall rating of the device must be reduced in accordance with the following chart:

Colors

The switch paddle is not removable for the 2400W switch; accordingly, you must order your desired color. It is available in White (WH) or Ivory (IV) colors.

Wallplate

No Wallplate is included when you purchase this switch; however, you may purchase a Wallplate cover from HAI. The white Wallplate is HAI Part Number 55A03-1, and the ivory Wallplate is HAI Part Number 55A03-2.

Configuration Software

When used with an HAI Home Control System HLC products automatically configure themselves, and outside software is not required. HAI offers HAI UPB™ UPStart Configuration software for professionals who desire to make advanced changes to our default setup.

HAI UPB™ UPStart configuration software will allow you to change the function of this dimming switch to be non-dimming or vice-versa. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.