HAI offers both Wireless Receivers and Wireless Transmitters that work with its Home Control Systems:

433 MHz for use in USA and international installations.

This receiver is equipped with RSSI (Received Signal Strength Indication) to help an installer determine if transmitters will work where they are placed.

All HAI Wireless products (designated by the HAI Wireless logo) require the use of this 64 Zone Wireless Receiver.

The Model 42A00-2 is compatible with all 319.5 MHz GE Security (a.k.a. ITI or Interlogix) and Caddx (crystal or SAW) Learn ModeTM 63-bit wireless transmitters.

This receiver is not compatible with 80-bit wireless transmitters.

The Model 42A00-2 Supervised Wireless Receiver allows up to 64 unique wireless transmitters to report information to an HAI home control system.

The following chart shows the number of wireless zones this receiver adds to each HAI System:

3 Zone Door/Window Transmitter that includes a mercury tilt switch for garage doors. Note that the picture compares the size of this transmitter to a USA quarter.

This Door / Window Transmitter requires the use of an HAI 64 Zone Wireless Receiver (HAI Part Number 45A00-1).

Quad Pet Immune Motion Detector that greatly reduces false alarms.

This Quad pet Immune Motion Detector requires the use of an HAI 64 Zone Wireless Receiver (HAI Part Number 45A00-1).

The 4 Button Keyfob may be programmed to control any HAI home control system feature, such as lights, temperatures, macros, and the security features of an Omni family home control system.

This Keyfob requires the use of an HAI 64 Zone Wireless Receiver (HAI Part Number 45A00-1).

Can trigger outgoing phone calls up to 8 different numbers, an e-mail notification, or video surveillance recording.

This Panic/Alert Pendant requires the use of an HAI 64 Zone Wireless Receiver (HAI Part Number 45A00-1).

The 56A00-1 Wireless Recessed Door Transmitter is used for protection of doors and windows in installations where the transmitter and magnet must be totally hidden. The supervised transmitter and contact are concealed within the door or window frame for virtual transparency.

This Wireless Recessed Door requires the use of an HAI 64 Zone Wireless Receiver (HAI Part Number 45A00-1).

The 57A00-1 Vanishing Door/Window Contact Transmitter has beveled edges that vanishes into any décor. It features a bypass button that allows you to manually bypass the transmitter, which automatically restores when the magnet is replaced.

This Wireless Vanishing Door/Window Contact Transmitter requires the use of an HAI 64 Zone Wireless Receiver (HAI Part Number 45A00-1).

The 58A00-1 Mini Door/Window Transmitter is a miniature (1.7 inch high x 1 inch wide x .65 inches deep) supervised wireless transmitter that comes with a case tamper switch, wall tamper switch, and a replaceable Lithium battery. The 58A00-1 is a single zone miniature version of the existing 46A00-1 Three Zone Door/Window transmitter with mercury tilt switch for garage doors.

This Mini Door/Window transmitter requires the use of an HAI 64 Zone Wireless Receiver (HAI Part Number 45A00-1).

The 61A00-1 Wireless Glassbreak Detector is an omni-directional acoustic sensor and wireless transmitter. It is used for detecting the sound of breaking glass, providing 360º of coverage.

This Glassbreak Window Sensor transmitter requires the use of an HAI 64 Zone Wireless Receiver (HAI Part Number 45A00-1).

The 4 Button Wireless Keypad sends up to 10 different wireless signals to activate automation programs in an HAI controller. Each button, or combination of buttons, can activate lighting, arm and disarm the security system, operate a garage door, set off a panic alarm, change temperatures, activate macros and any other function available in an HAI controller.

It features an elegant, slim design (4.5”H x 2.75”W x 0.3”D) which mounts on any wall where a light switch is desired but electrical wires aren’t available to connect it to. It adheres to any surface, though it can also be used as a remote. An LED indicator on the front of the switch visually confirms that a signal has been sent.

The 4 Button Wireless Keypad requires the use of an HAI 64 Zone Wireless Receiver (HAI Part Number 45A00-1).